-40%

CABOT Semi-Transparent Oil Stain, 0306, 1 Quart / 1 Gallon, 54 Color Options

$ 20.59

Availability: 540 in stock
  • MPN: 0306
  • Transparency: Semi-Transparent
  • Container Size: 1 gal or 1 qt
  • Brand: Cabot
  • Condition: New
  • All returns accepted: ReturnsNotAccepted

    Description

    Cabot® Semi-Transparent Deck and Siding Stain is a deep-penetrating, linseed oil-based stain that beautify and protect exterior wood. This lightly pigmented stain enhances the natural beauty of the wood by allowing the grain, texture, and color variations within the wood to show through. Will provide long-lasting, vaporpermeable protection that beautifies and enriches exterior wood surfaces. Formulated with non-fade, earth tone pigments to weather slowly over time.
     Water-repellent
     Deep-penetrating oil
     Fade resistant
     Lightly pigmented oil stain for increased UV protection and color
    For use on:
    Exterior wood decks, siding, fences and trim. Also suitable for use on shingles, shakes and roofs. Especially effective on rough-sawn surfaces.
    Apply with a natural bristle brush or professional spray equipment. When spraying, always backbrush immediately. To ensure desired appearance and proper drying time, always finish a small test area before proceeding. Do not overapply. Shake and stir thoroughly before and during use. If project requires more than 1 container, blend all containers together to ensure uniformity. Apply to small sections at a time (1– 3 boards); start at one edge and follow through to the end of the boards to avoid lap marks. Apply 1 coat only. For wood substrates only. Airless Spray: Recommended tip sizes and adjustments are 1000–1500 PSI, 0.013–0.015” tip with fan width of 8–10”. These recommendations are a starting point only. Due to variability in sprayers, we recommend testing your spray pattern and flow before proceeding. If spraying large surfaces, be sure to back-brush or roll immediately after spraying. When using HVLP spray equipment, see manual for proper set-up instructions.
    The appearance of the finish will vary depending on the porosity and color of the wood surface. To ensure desired appearance and proper drying time, always finish a small test area before proceeding.
    Custom tinted stain is non-refundable.